OMAX MAXIEM Waterjet Metal Cutting Machine, Scalen Press Brake, Farley Plasma Profile Cutter & Roundo Profile Bending Machine Online Offsite Auction

Starts 06:00pm Friday, 30/10/26
Closes 06:00pm Wednesday, 04/11/26
Inspection Inspection available onsite at 56 Brook Road, Wattle Grove, WA, on Monday the 2nd of November 2026 from 9:00am to 12:00pm.
Location Offsite
56 Brook Road, Wattle Grove, WA 6107
Contact Roger 0418 907 158 Email

Collection

Goods to be collected on Friday the 6th and Monday the 9th of November 2026, at 8:30am to 2:00pm from 56 Brook Road, Wattle Grove, WA. (All goods must be removed by 2:00pm on Monday the 9th of November 2026). PLEASE NOTE: Any invoice changes required after the closure of the auction will incur a $150/per invoice fee.

Buyers Premium & GST

A buyer's premium of 15.00% applies to this auction.
This auction is GST inclusive

Payment

Full Payment must be made within 24 hours.

OMAX MAXIEM Waterjet Metal Cutting Machine, Scalen Press Brake, Farley Plasma Profile Cutter & Roundo Profile Bending Machine Online Offsite Auction

AUCTION ITEMS INCLUDE

- OMAX MAXIEM WATERJET METAL CUTTING MACHINE

- SCALEN PRESS BRAKE

- FARLEY PLASMA PROFILE CUTTER

- ROUNDO PROFILE BENDING MACHINE


Inspection available onsite at 56 Brook Road, Wattle Grove, WA, on Monday the 2nd of November 2026 from 9:00am to 12:00pm.

Condition of Site Entry

Enclosed Footwear MUST be worn onsite.


​All items are sold ‘as is, where is’
All items at Ross’s Auctions are sold on an ‘as is, where is’ basis. This means the item is being sold in its current condition, regardless of any faults or damage. The bidder accepts full responsibility in satisfying themselves with the item prior to bidding. It is recommended that that if the bidder is in doubt, not to bid as no returns or refunds will be made. 


PICK UP: Goods to be collected on Friday the 6th and Monday the 9th of November 2026, at 8:30am to 2:00pm from 56 Brook Road, Wattle Grove, WA. (All goods must be removed by 2:00pm on Monday the 9th of November 2026). PLEASE NOTE: Any invoice changes required after the closure of the auction will incur a $150/per invoice fee.

NOTE: To collect your goods, please ensure you have a valid form of Photo Identification present (such as a Driver's Licence) if you are requested to confirm your identity.

NOTE: Please adhere to the specified Collection Period to avoid any delays. All uncollected goods beyond the designated timeframe will be considered abandoned by the Buyer.





**PLEASE NOTE**

Any invoice changes required after the closure of the auction will incur a $150/per invoice fee.

**UPDATED PAYMENT CONDITIONS**

Upon receiving invoice for winning lots, payment can be made through your Member Tools, EFT or In-Person at our Welshpool Complex located at 453 Orrong Road.

Download Catalogue
20
Lot: 1
Qty: 1
2019 OMAX MAXIEM ABRASIVE WATER JET METAL CUTTING MACHINE

MODEL#1530 CNC/SERIAL NUMBER# M15305954
CUTTING TABLE SIZE 3048mm x 1575mm

COMPLETE WITH: OMAX WATER RECYCLING SYSTEM, OMAX ENDUROMAX HIGH PRESSURE WATERJET DIRECT DRIVE PUMP - 60,000PSI, PERFORMANCE WATERJET BULK GARNET HOPPER WITH STAND, AIR COOLED INDUSTRIAL WATER CHILLER, OMAX LAMINAIR FILTER SETTLING TANK, GLEMCO GARNET DELIVERY HOOPER, WRIGHT SHELF DUMP HOOPER, NUWEIGH DIGITAL PLATFORM SCALE, OMAX TILT-A-JET CALIBRATION GUIDE, ASSORTED SPARES
Bidding Starts in: 1 day 34 mins 50 secs
$25,000 (0 bids)
6
Lot: 2
Qty: 1
SCALEN CNC HYDRAULIC PRESS BRAKE

MODEL# FX31120/CAPACITY 120 TONNE
SCALEN PRO-FACE CN CONTROL
MASCOM ELECTRONIC SAFETY TRANSMITTER/RECEIVER SENSOR & GATES
BLADES 1 x 3100mm, 1 x 1900mm, 9 x SEGMENTS
APPROX WEIGHT 8.5 TONNES

NOTE: CRANE REQUIRED WITH TWO 50 TONNE SKATES TO UPLIFT PRESS BRAKE
Bidding Starts in: 1 day 34 mins 50 secs
$6,000 (0 bids)
6
Lot: 3
Qty: 1
2017 FARLEY LASERLAB PLASMA PROFILE CUTTER

MODEL# QUICK EDGE
WITH HYPERTHERM POWER MAX 45XP PLASMA SOURCE
WITH ULTRA MAX RFD-42GZ COMPRESSED AIR DYER
CUTTING TABLE SIZE 5400mm x 2000mm
CAPACITY UP TO 16mm PLATE -PIERCE & CUT, UP TO 29mm SLOW/SEVER CUT
Bidding Starts in: 1 day 34 mins 50 secs
$6,000 (0 bids)
3
Lot: 4
Qty: 1
1991 ROUNDO 3 ROLL HYDRAULIC PROFILE BENDING MACHINE

MODEL# R-6-S/SHAFT DIAMETER 460mm
CAPACITY UP TO 6" ANGLE, 6.5" PIPE
POWERED BY 200HP 3 PHASE MOTOR
APPROXIMATE WEIGHT 7.8 TONNES

(*NOTE - CRANE REQUIRED TO UPLIFT PROFILE BENDER*)
Bidding Starts in: 1 day 34 mins 50 secs
$5,000 (0 bids)

OMAX MAXIEM Waterjet Metal Cutting Machine, Scalen Press Brake, Farley Plasma Profile Cutter & Roundo Profile Bending Machine Online Offsite Auction

AUCTION ITEMS INCLUDE

- OMAX MAXIEM WATERJET METAL CUTTING MACHINE

- SCALEN PRESS BRAKE

- FARLEY PLASMA PROFILE CUTTER

- ROUNDO PROFILE BENDING MACHINE


Inspection available onsite at 56 Brook Road, Wattle Grove, WA, on Monday the 2nd of November 2026 from 9:00am to 12:00pm.

Condition of Site Entry

Enclosed Footwear MUST be worn onsite.


​All items are sold ‘as is, where is’
All items at Ross’s Auctions are sold on an ‘as is, where is’ basis. This means the item is being sold in its current condition, regardless of any faults or damage. The bidder accepts full responsibility in satisfying themselves with the item prior to bidding. It is recommended that that if the bidder is in doubt, not to bid as no returns or refunds will be made. 


PICK UP: Goods to be collected on Friday the 6th and Monday the 9th of November 2026, at 8:30am to 2:00pm from 56 Brook Road, Wattle Grove, WA. (All goods must be removed by 2:00pm on Monday the 9th of November 2026). PLEASE NOTE: Any invoice changes required after the closure of the auction will incur a $150/per invoice fee.

NOTE: To collect your goods, please ensure you have a valid form of Photo Identification present (such as a Driver's Licence) if you are requested to confirm your identity.

NOTE: Please adhere to the specified Collection Period to avoid any delays. All uncollected goods beyond the designated timeframe will be considered abandoned by the Buyer.





**PLEASE NOTE**

Any invoice changes required after the closure of the auction will incur a $150/per invoice fee.

**UPDATED PAYMENT CONDITIONS**

Upon receiving invoice for winning lots, payment can be made through your Member Tools, EFT or In-Person at our Welshpool Complex located at 453 Orrong Road.

Back to top