Starts | 03:00pm Friday, 12/11/21 |
---|---|
Closes | 02:00pm Friday, 10/12/21 |
Inspection | By Appointment |
Location | Onsite Neerabup, WA 6031 |
Contact | David Crofts 0418 945 349 Email |
---|
Auction Documents
Filename | File Size |
---|---|
Shredder Details 1 .docx | 14.27 KB |
2018 Dual Shaft Multi Purpose Shredder Online Auction
The machine was purchased and installed in 2018 and commenced operation in Sept 2019 and fully operational from 2020.
Currently used to pre shred loose car bodies, light scrap and non ferrous metal. The machine can also be used to shred tyres.
The shredder has a min output of 4-5T+ per hour and can shred metals down to approx. 300-400mm x 125mm
Refer to attached Download Document for Full Specifications
Does not include: Generator, External Walkways, Ground Level Extension Frame, Electric Cable, Conveyor Belt System, or Hopper Feed Extension.
The Shredder can be partially dismantled and transported on 1 x semi trailer
Note that the Shredder has been set up to suit current operations and has been welded onto an approx. 700mm (H) frame support at base of main shredder frame to increase ground clearance.
Seller will be responsible to separate main shredder body from ground level extension frame and disconnect power
Purchaser will be responsible to load and remove shredder on to own transport
Collection to be by arrangement by no later than 16.12.2021. No loading services available on site
Inspections are welcome and are by appointment only
Shredder can be demonstrated during the inspection period or via videos attached below.
Contact Dave Crofts 0418 945 349 or via email dcrofts@auctions.com.au
NOTE AUCTION CLOSING DATE HAS BEEN EXTENDED TO 10 DECEMBER
All items are sold ‘as is, where is’
All items at Ross’s Auctions are sold on an ‘as is, where is’ basis. This means the item is being sold in its current condition, regardless of any faults or damage. The bidder accepts full responsibility in satisfying themselves with the item prior to bidding. It is recommended that that if the bidder is in doubt, not to bid as no returns or refunds will be made.
NOTE: Storage Charges at $100 per day per lot applies if not collected by
PICK UP: Goods to be collected by appointment from Neerabup,
MAKE: GONGYI CITY HONGYUAN METAL SHREDDER (Serial Number ZSY355)
INCLUDES: 2 X 90KW ELECTRIC MOTORS, 2 X HARD TOOTH SURFACE REDUCERS ZSY400, 13 X W5SICR 1600MM (L) X 650MM (W) X 125MM (THICKNESS) BLADES PLUS 2 X SPARE BLADES, HOPPER, CONTROL BOX.
SHAFT DIAMETER 260MM, SHAFT SPEED 7.5RPM, MINIMIM OUTPUT APPROX 4-5T PER HOUR
APPROX DIMENSIONS OF MAIN SHREDDER BODY: 5M (L) X 2.33M (W) X 2M (H), HOPPER 3.25M (L) X 2.35M (W) X 2.24M (H). WEIGHT APPROX 22 TONNES.
DOES NOT INCLUDE GENERATOR, ELECTRIC CABLE, EXTERNAL WALKWAYS, GROUND LEVEL EXTENSION FRAME, CONVEYOR BELT SYSTEM OR HOPPER EXTENSION.
SELLER TO DISCONNECT SERVICES AND SEPERATE MAIN SHREDDER BODY FROM GROUND LEVEL EXTENSION FRAME. PURCHASER TO PROVIDE OWN LOADING AND TRANSPORT.
COLLECTION BY ARRANGEMENT BY NO LATER THAN 16.12.21. REFER TO DOWNLOAD DOCUMENT FOR FULL DETAILS.
2018 Dual Shaft Multi Purpose Shredder Online Auction
The machine was purchased and installed in 2018 and commenced operation in Sept 2019 and fully operational from 2020.
Currently used to pre shred loose car bodies, light scrap and non ferrous metal. The machine can also be used to shred tyres.
The shredder has a min output of 4-5T+ per hour and can shred metals down to approx. 300-400mm x 125mm
Refer to attached Download Document for Full Specifications
Does not include: Generator, External Walkways, Ground Level Extension Frame, Electric Cable, Conveyor Belt System, or Hopper Feed Extension.
The Shredder can be partially dismantled and transported on 1 x semi trailer
Note that the Shredder has been set up to suit current operations and has been welded onto an approx. 700mm (H) frame support at base of main shredder frame to increase ground clearance.
Seller will be responsible to separate main shredder body from ground level extension frame and disconnect power
Purchaser will be responsible to load and remove shredder on to own transport
Collection to be by arrangement by no later than 16.12.2021. No loading services available on site
Inspections are welcome and are by appointment only
Shredder can be demonstrated during the inspection period or via videos attached below.
Contact Dave Crofts 0418 945 349 or via email dcrofts@auctions.com.au
NOTE AUCTION CLOSING DATE HAS BEEN EXTENDED TO 10 DECEMBER
All items are sold ‘as is, where is’
All items at Ross’s Auctions are sold on an ‘as is, where is’ basis. This means the item is being sold in its current condition, regardless of any faults or damage. The bidder accepts full responsibility in satisfying themselves with the item prior to bidding. It is recommended that that if the bidder is in doubt, not to bid as no returns or refunds will be made.
NOTE: Storage Charges at $100 per day per lot applies if not collected by
PICK UP: Goods to be collected by appointment from Neerabup,